Installation Guide

Mounting the Worktop
Place worktop over cabinets and lower onto cabinets.
Drill 4, 3/32” pilot holes on
interior roof of cabinet.
Tighten screws to secure cabinets.
3
15
16
17
4 - #8 x 25mm
screws
Fastening Cabinets
Note:
All shelves and drawers must be removed
prior to fastening cabinets together.
X4
Using pilot hole as guides, screw into second cabinet.
Do not over-tighten screws and punch through other side!
Drill 3/32 pilot holes on interior wall of cabinet being fastened.
Parts Needed.
12
13
14
4 - #8 x 25mm
screws