Installation Guide

Fastening Cabinets
Note:
All shelves must be removed prior to
fastening cabinets together.
Using pilot hole as guides, screw into second cabinet.
Do not over-tighten screws and punch through other side!
X4
Drill 3/32” pilot holes on interior wall of cabinet being
fastened.
Parts Needed.
4
5
6
4- #8 x25mm
screws
Installing the Handles
Parts Needed.
Align handle to holes
on doors or drawers.
Screw in bolts.
1
2
3
2 x Handles
Note:
Cabinets come with handles installed on
inside of drawers/doors.
4 x Handle Bolt
M4 x 22mm