Installation Guide

Handles

Threaded Washer

Threaded Caps

Handle Bolts ( M4 x 22mm)

#8 x 25mm Screws

Lag Screw ( 6 mm x 55 mm)

Wall Rack Cabinet

Parts Supplied

Handles

Handle Bolts

M4 x 22 mm

Tools Needed

1 x Tape Measure

1 x #2 Phillips Bit

(opitional)

1 x Pencil

1 x Cordless Power Drill

(optional)

1 x #2 Phillips head

screwdriver

1 x Flashlight

(optional)

1 x

2.5mm or 3/32”

drill bit

1 x

6.5 mm or 1/4”

drill bit

1 x Stud Finder

Lag Screw

6 mm x 55 mm

#8 x 25 mm

Screws

Threaded

Washer

Threaded Cap

Unpacking

• Begin by placing the package on a covered at surface.

• Remove all cardboard, foam packaging material and clear plastic bags.

• Dispose / recycle all packaging materials.

• Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.