Installation Guide
15
Floor
Drill Floor in marked positions
with appropriate drill for substrate.
1 X Measuring Tape
1
Parts Needed.
1 X Pencil
Hammer drill and bit
6 X Wood Screws
6 X Tapcon Screws
2 X Hold down Brackets
1 x Marking Template
2
Place Marking template on your
indicating where to place your cabinet.
Mark 6 drill locations using
Step 1
template to place brackets
Floor
Wall Or Structure
Fasten Floor Brackets with
3 Tapcons(concrete) 3 wood
screws (wood)
Move cabinet glides into
brackets to secure cabinet
3 Drawer Specic Instructions