Installation Guide

35
Leak Testing Instructions
Fixing a Gas Leak
• Shut o the gas supply.
• Turn all grill controls to the “ON” position to purge the grill of any gas build-up, then turn the
controls back “OFF”.
• Wash o the soapy solution with cold water and dry.
• Tighten the loose joint, or replace the faulty part with manufacturer-recommended replacement
parts.
• Repeat the leak test to ensure that no leaks are present.
• If the leak cannot be stopped, immediately shut o the gas supply, disconnect it, and have the
grill inspected by a licensed gas tter. Do not use the grill until the leak has been corrected.