Installation Guide

53
Replacing LED Lights
Remove the screws holding the LED light
holder using Phillips head screw driver.
1
Remove the LED light assembly and
disconnect it from the power connector.
2
Loosen the lock nut and replace the LED
Bulb.
3
Connect the LED light assembly to the
power connector and secure it to the grill
with the two screws using Phillips head
screw driver.
4
NOTE
• Disconnect grill at power source before replacing light bulbs.
• The oil from your ngertips will reduce the life of the bulb. It is recommended to touch the bulb
as little as possible and to wipe the bulb with a cloth after handling with bare ngers.