Instructions / Assembly
Table Of Contents
- IM-HKC.01A-01 REV 1.1_Home Cabinets Installation Guide
- Unpacking
- Product Inspection
- Home Cabinets and Accessories
- Tools Needed
- Hardware
- Room Preparation
- Installation Layout Options
- Installation Overview
- Removal and Installation of Doors
- Removal and Installation of Drawers
- Installation of Drawer Front Panels
- Installation of Drawer Front Panels
- Adjusting the Wood Shelves
- Installation of Glass Shelves on Wall Cabinets with Glass Doors
- Installation of Feet for Base Cabinets
- Corner Layout Installation
- Wall Rail Installation for Wall Cabinets
- Wall Cabinets Installation
- Installing the Linear layout
- Installing the Island layout
- Installing the U shaped layout
- Additional Accessories offered by NewAge
- SPARE PARTS - BASE CABINET with DOORS
- SPARE PARTS - BLIND CORNER
- SPARE PARTS - 3 DRAWER
- SPARE PARTS - SPLIT DRAWER and DOORS
- SPARE PARTS - PANTRY
- SPARE PARTS - SINK CABINET
- SPARE PARTS - STANDARD WALL CABINETS
- SPARE PARTS - CORNER WALL CABINET
- DOOR AND DRAWER REFERENCE TABLE
- Manufacturer One Year Limited Warranty
26
Installation of Drawer Front Panels
Fix four support bar locks into the top four
holes at both corners of the panel. Tighten
the screws on the locks using a philips
screwdriver.
Push the middle drawer front panel into
the middle drawer and make sure the
drawer front connectors are locked into
the drawer properly.
3 4
Fix the dawer front connectors into the
bottom two holes at both ends of the
panel. Tighten the screws using a philips
screwdriver.
2
Take the Middle drawer front panel and
x the drawer stabilizer(36in Drawer only)
into the two holes at the centre on back
of the panel.Tighten the screws using a
philips screwdriver.
1
Middle and Bottom Drawers