Installation & Assembly

13
Installation Options
• Ensure you have followed the recommended steps on page 10.
• Once your space has been prepared , measure 3/8” from your wall and rst tile / plank. The
3/8” gap will need to remain as your expansion gap along the perimeter of the room.
• 3/8” should also provide enough space to install the Silver Finishing Strips at the end. Read
the instructions for Installing the Silver Finishing Strips on page 18-20 before starting.
• If you are not installing the Silver Finishing Strips, keep a 3/8” expansion gap between your
wall and tile or plank
• Customers have the option of isntalling their own nishing strips, baseboards and quarter
rounds as long as there is at least a 3/8” expansion gap.
Option 1 : Installing NewAge Garage Flooring only
3/8”
• Ensure you have followed the recommended steps on page 10.
• Once your space has been prepared and all quarter rounds have been removed , line your tile
or plank along the edge of your baseboard.
• This will need to remain the same along the perimeter of the room.
• Quarter rounds will be installed once the ooring install has been completed.
Option 2 : Installing NewAge Garage Flooring with pre-installed baseboards