Installation & Assembly
Table Of Contents
9
General Suboor Preparation
• NewAge Stone Composite Flooring is suitable to be installed over radiant heating systems as
long as the heating element is not in direct contact with the ooring. Leave at least 1/2” gap
between the Floors and radiant heat systems.
• If the radiant heating has been newly installed, leave the system on and operational for at
least 2 weeks prior to installation. This would reduce the moisture levels in the concrete.
• Turn o the heating system for 24 hrs before and after installing NewAge Stone Composite
Flooring.
• It is recommended for the desired room to be 5°C (41°F) to 24°C (75.2°F) prior to installation.
You may need to use other heating methods prior to install.
Radiant heating