Use and Care Manual

9
TROUBLESHOOTING
Problem Possible Causes Soluon
Cooler does not
operate.
The unit may be
plugged in using a
different voltage.
Check if using the
wrong voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
Reset the circuit
breaker or check for a
broken fuse
Cooler is not cold
enough.
The external
environment may
require a higher
seng.
Lower the temperature
of the cooler.
The door may be
opened too frequently.
Open the door less
frequently.
The door is not closed
completely.
Make sure the door is
closed securely.
The door seal does not
seal properly.
Replace the seal on the
door. Replacements
can be acquired from
the manufacturer.
The front grille is
obstructed.
Make sure nothing is
blocking the front grille.
The light does not
work.
There may be a
problem with the
display board.
Contact the
manufacturer.
The cooler vibrates
while operang.
The unit is not sing
on a level floor, or the
unit’s feet are not
correctly installed.
Make sure the unit’s
feet are in the proper
posion and ghtened
securely.
The cooler produces a
lot of noise.
The unit is not leveled. See above.
The fan may be
obstructed
Check the fan to make
sure there is no debris
or obstrucon. If not,
contact the
manufacturer.
The door will not close
properly.
The unit is not leveled. See above.
A Name You Can Trust