AF-310 Evaporative Cooling Fan OWNERS MANUAL Read and save these instructions. .
A Name You Can Trust Trust has to be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Safety Information & Warnings ........................................................................... 3 Parts List ............................................................................................................... 5 Setup Instructions ................................................................................................ 5 Operating Instructions ...................................................................................
Do not operate this appliance if it has a damaged cord or plug. If the power cord or plug is damaged, it must be replaced by the manufacturer or an authorized service facility in order to reduce the risk of fire. When not in use, disconnect the plug from the power outlet. When disconnecting the plug from the outlet, grasp the plug and not the main power cord. Be sure to drain the water out of the tank when not in use for a prolonged period of time.
PARTS LIST SETUP INSTRUCTIONS Before operating the unit, pull out the water tank and fill it with water before operating the fan. Do not pour water above 100°F into the water tank.
Please Note: Do not place the ice box into the water tank when the water tank is full. Doing so can cause water to overflow. Freeze the ice box each time before placing it in the water tank. The ice box is permanently sealed. Do not open the ice box or try to put the cooling gel directly into the water tank. This can cause damage to the water pump. The gel within the ice box is non-toxic. http://www.NewAir.
OPERATING INSTRUCTIONS POWER BUTTON: 1. Connect the plug into the power outlet. A beeping sound will be heard once the plug is plugged in. 2. Press the POWER button. The FAN indicator and HIGH speed indicator will turn on and beep. The unit will operate on the strongest setting in normal mode. 3. Press the POWER button again to shut off the unit. MODE BUTTON: 1. Press the MODE button. At this time, the NATURE indicator will turn on. Press the POWER button 2 times to set the unit to SLEEP mode.
both the HIGH and SLEEP indicators will turn on. The speed will automatically change as follows: First 0.5 Hour: The unit will alternate on HIGH and MED speed every 10 seconds. Second 0.5 Hour: The unit will switch to the MED speed setting. After 1 Hour Until Shut-Off: The unit will switch to the LOW speed setting. For MED Speed + SLEEP Mode: 1. Press the SLEEP button when the SPEED mode is set to MED. This will program the unit to work in SLEEP mode with MED speed.
MED Speed + NATURE Mode: 1. Press the NATURE button when the SPEED mode is set to MED speed. This will program the unit to work in NATURE mode with MED speed. At this time, both the MED and NATURE indicators will turn on. The speed will automatically change according to this schedule: MED speed 5 sec. -> LOW speed 5 sec. -> MED speed 5 sec. -> LOW 5 sec. -> stop 5 sec. -> MED speed 10 sec. -> LOW speed 10 sec. -> MED speed 5 sec. -> LOW 5 sec. -> stop 5 sec. -> MED speed 5 sec. -> LOW speed 5 sec.
3. Press the SPEED button once more. The LOW speed indicator will turn on and the unit will operate on the lowest setting. SWING Button 1. 2. Press the SWING button. At this time, the indicators will turn on and the louvers will swing (covers 60 degrees horizontally). Press the SWING button again to stop the unit at a desired position. The indicator will turn off at this time. TIMER Button 1. 2. Press the TIMER button to set the timer.
Air Direction Lever Adjust the direction of the inside wind bar by turning the lever. This will allow you to adjust the air flow horizontally. CLEANING & MAINTENANCE IMPORTANT: Disconnect the plug from the power outlet before cleaning or maintaining this appliance. Clean the outside housing with a moist, damp cloth. From time to time, depending on the nature of your water supply, you may need to clean the inside of the water tank by following these steps: 1. Fill the water tank with 1 cup (8 oz.
1. 2. 3. 4. Remove the back cover and dust filter from the unit. Remove the cooling pad from the unit. Rinse the filter net and cooling pad with water, and then dry them in direct sunlight. Replace the filter and cooling pad. TROUBLESHOOTING Problem Possible Causes Solution The unit produces no air. Some parts are damaged. The unit cannot be turned off. Some parts may be damaged. Take the unit to an authorized service agency or technician for repairs.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.