Use and Care Manual

9
1. Remove the back cover and dust filter from the unit.
2. Remove the cooling pad from the unit;
3. Rinse the filter net and cooling pad with water, and then dry them in direct sunlight.
4. Replace the filter and cooling pad.
Troubleshooting
Problem Possible Reasons Solutions
The unit
produces
no air.
l There is no power.
l Some parts are damaged.
l Connect the main lead, and then press the
POWER button.
l Take the unit to an authorized service
agency or technician for repairs.
The unit
cannot be
turned off.
l The POWER button was
not pressed
l Some parts may be
damaged.
l Press the POWER button to turn the unit
off.
l Take the unit to an authorized service
agency or technician for repairs.
The unit
makes a lot
of noise.
l Foreign objects are
stuck inside the unit
l The motor is defective.
l The air wheel is loose.
l Take off the side cover board, then
net.
Remove any foreign objects.
l Take the unit to an authorized service
agency or technician for repairs.
The fan
doesn’t
humidify.
l There is insufficient water.
l The pump is out of order.
l The water pipe has come
off.
l Add water to the tank.
l Take the unit to an authorized service
agency or technician for repairs.
There is no
swing.
l The swing motor is
defective.
l Take the unit to an authorized service
agency or technician for repairs.