AF-520B 18" Outdoor Misting Fan OWNERS MANUAL Read and save these instructions.
A Name You Can Trust Trust has to be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Specifications…………………………………………………………………………………………………… 3 Before First Use……………………………………………………………………………………………….. 3 Important Instructions………………………………………………………………………..…………… 4 Parts List………………………………………………………………………………………………………….. 5 Preparation...........................................................................................................
IMPORTANT INSTRUCTIONS CAUTION Read Rules for Safe Operation and Instructions Carefully. SAFETY INFORMATION WARNING • To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control device. • This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
PARTS LIST A. Front grill B. Blade cap C. Fan blade D. Plastic nut E. Rear grill F. Motor shaft G. Clutch Knob H. Motor housing I. Push button J. Thumb screw K. Power cord L. Waterproof cover M. Misting line holder N. Internal pole O. Height adjustment knob P. External pole Q. Misting line R. Filter washer S. Valve T. Base U. "7" finger screw A B C D F G H J E I Q K L N M R O S P T U PREPARATION Before beginning assembly of product, make sure all parts are present.
Step 2. Fan Head Assembly (Fig. 2) 1. Remove the blade cap (B) by turning clockwise. Remove the plastic nut (D) by turning counter clockwise. 2. Position the rear gille (E) over the motor shaft (F), make certain the handle is at the top and the one notch in the rear of rear grill (E) cover fit over the three prong on the motor housing(H). 3. Secure rear grille (E) by turning the plastic nut (D) clockwise and tightening firmly. 4.
OPERATING INSTRUCTIONS 1. Place the fan on a level surface. Plug the GFCI plug into a standard 120V AC 3-Prong wall outlet. 2. Attach the Valve(S) onto a standard outdoor hose. Turn your water on at the spigot and use the lever on the valve(S) to turn water on and off. 3. To turn oscillation mode on, push the Clutch Knob (G). Pull the Clutch Knob (G) up to turn oscillation off. 4. To adjust the air flow upward or downward, simply tilt the fan head with hand and move to desired angle. 5.
Misting Nozzle Maintenance: 1. To clean the misting nozzles, use a pair of needles nose pliers to twist each nozzle counterclockwise. 2. Once removed, soak the nozzles in white vinegar for 2 hours. 3. Rinse each nozzle with water and place back into the front fan grill. 4. Twist clockwise until secure. DO NOT over tighten.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
