AH-450B Oil-Filled Radiator Heater OWNERS MANUAL Read and save these instructions. .
A Name You Can Trust Trust has to be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Specifications ....................................................................................................... 3 Before First Use.................................................................................................... 3 Important Instructions ......................................................................................... 4 Parts List ...........................................................................................
For your convenience, record the date you received the appliance on the warranty page of these instructions, and attach your proof of purchase. Retain this information in the event that warranty service is required. IMPORTANT INSTRUCTIONS When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property.
This heater draws 12.5 A during operation. To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working. CAUTION: It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace a loose or worn outlet. To disconnect the heater, first turn controls to the OFF position, then remove plug from the outlet.
PARTS LIST ASSEMBLY INSTRUCTIONS Unpack your heater and find the wheel-holding plate and butterfly nuts between the fin assemblies. 1. 2. 3. Make sure the heater is unplugged and in the “OFF” position. Turn the heater upside down. Attach the wheel-holding plates onto the heater as Fig.1 shows. The U plate is fixed between the last two fins and the other one is fixed under the http://www.NewAir.
4. 5. metal control box. Fix the castors to the vertical axis of both the wheel holding plates. Insert the butterfly nuts and screw them in tightly. Turn the heater upright. Your heater is now ready for use. WARNING: Risk of fire. Do not operate heater without wheel assemblies attached. Operate heater in upright position only (wheels on bottom, controls on top). Ensure that the surface beneath the heater is clean and free of any obstructions.
1. 2. 3. 4. 5. 6. Check that neither the appliance nor the power cable has been damaged in any way during transportation when first using the heater. Place the heater on a firm, level surface at least 3 feet (0.9 m) away from any wall and any other objects such as furniture, curtains, plants or combustible material. Plug into a standard 120 V AC, 60 Hz source. IMPORTANT: Your heater is equipped with a polarized alternating current line plug (a plug having one blade wider than the other).
will turn on. The “2H” icon will be displayed on the control panel to indicate that the heater will turn on after 2 hours. Press the timer button repeatedly to automatically turn on the heater at any desired hour set in a sequence of 2-4-6-8-10. The timer is adjustable up to 10 hours with an interval rate of 2 hours. B. Setting the timer to turn off the heater. Press the timer button once when the heater is in operation.
This heater includes a safety tip-over protection feature which will shut the heater off in case it is tipped over. If, at any time, the heater does tip over, please put the heater back in the upright position (wheels on bottom, controls on top). The heater will resume its normal operation. CAUTION: This heater includes an Overheat Protection System that shuts the unit off if it overheats due to abnormal conditions. At this time, the “C” Caution Indicator Light gets on.
Problem The room is not hot enough. Possible Causes Solution The set temperature is lower than the current room temperature. Set the desired temperature higher than the current temperature to restart the heater. The room temperature has reached the temperature set at the thermostat. This is normal. The heater will restart once room temperature is lower than set temperature. One of the safety protection devices was activated to prevent overheating.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.