AI-100 Series Portable Ice Maker OWNERS MANUAL Read and save these instructions. Manual v1.
A Name You Can Trust Trust should be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications Special Promotions Opt-in for NewAir promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: Register.NewAir.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Safety Information & Warnings ...................................................... 5 Parts List .......................................................................................... 6 Basic Parts Diagram .................................................................. 6 Control Panel Diagram ............................................................. 6 Assembly & Installation ..................................................................
SAFETY INFORMATION & WARNINGS As with any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips: • • • • • • • • • Do not operate this appliance if it has a damaged cord. Only connect the ice maker to a properly polarized outlet. No other appliance should be plugged into the same outlet.
PARTS LIST BASIC PARTS DIAGRAM CONTROL PANEL DIAGRAM BUTTONS: Power - Turns unit on and off Select - Selects ice size INDICATOR LIGHTS: S - Small ice size selected M - Medium ice size selected L - Large ice size selected Ice - Ice basket is full Add water - Water reservoir is empty http://www.NewAir.
DETAILED PARTS DIAGRAM
ELECTRICAL DIAGRAM ASSEMBLY & INSTALLATION 1. 2. 3. Remove the exterior and interior packaging. Check that the ice basket and ice scoop are included. If any parts are missing, please contact customer service. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean it. Place your ice maker in a location that is protected from direct sunlight and other heat sources (e.g., stove, furnace, and radiator).
4. Allow one hour for the refrigerant fluid to settle in the compressor before plugging the ice maker in. NOTICE: After unpacking your ice maker, it must rest in an upright position for at least one hour before you plug it in or the compressor may be damaged, shortening the life span of the unit. 5. Plug in your appliance into an exclusive, properly installed and grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord.
6. 7. The ice maker automatically stops working when the ice basket is full. The “ICE” indicator light will also turn on at this time. Change the water in the reservoir every 24 hours to ensure hygienic ice. If the ice maker will not be used for an extended period of time, drain the water from the reservoir by unplugging the drain off cap located on the side of the ice maker. CLEANING & MAINTENANCE 1. 2. 3. 4. 5. Unplug the unit and remove the ice basket.
TROUBLESHOOTING Problem The “ADD WATER” indicator light is on. Possible Cause There is not enough water in the tank. The “ICE” indicator light is on. The “ADD WATER” and “ICE” lights are both flashing. The ice basket is full. The ice making cycle appears to be normal but no ice is being produced. The refrigerant may be leaking. The ice cubes are too small. The ice has a “plastic” taste. The ice shovel may be incorrectly positioned. Ice may be blocking the sensor.
Problem The unit produces a large block of ice instead of cubes. Possible Cause The ambient temperature may be too low. The ice cubes have a cloudy appearance. There may be trace minerals in your water or ice is being produced too quickly. Solution Unplug the unit and let the ice thaw out. Allow the ice maker to defrost for a few hours and restart the unit. Ice cubes may develop cloudiness when water is frozen quickly.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.