User Manual

13
8. Dry the interior and exterior with a soft cloth.
9. Tighten the drain cap. Replace the ice basket and plug the unit in again.
To remove the build-up of calcium or other impurities, add a capful of vinegar
or lemon juice to the water in the reservoir and run for two or three ice-making
cycles. Drain and refill the reservoir with clean, warm water. Run two more
cycles to rinse the vinegar or lemon-juice.
When the machine is not in use open the water drain cap to completely drain
the water reservoir.
STORAGE
Before storing your ice maker, clean it according to the directions above and
allow it to dry thoroughly – at least 24 hours – in order to prevent the growth
of mold or mildew.
Store your ice maker in the original packaging, or cover with a soft cloth or
plastic sheet.
TROUBLESHOOTING
Problem
Possible Cause
Solution
The “ADD WATER”
indicator light is on.
There is not enough
water in the tank.
Press “POWER” to turn
off the unit. Fill the
reservoir with water.
Press “POWER” to
restart.
The “ICE BUCKET FULL”
indicator light is on.
The ice basket is full.
Remove ice from the
basket.
The “WARNING”
indicator light is on.
Ice shovel cannot
rotate.
Check if ice cubes are
blocking the ice shovel;
otherwise, consult a
certified technician to
check the motor and
micro switch.