User Manual

9
CLEAN – Begin self-cleaning function (refer to page 7)
LCD DISPLAY SYMBOLS:
Power indicator
Ice Bucket Full
Indicator
Ice size selected
(small, medium
or large)
Add Water Indicator
(flashes when water
needs to be added)
Timer display
Warning Indicator –
problem with unit
Self-Cleaning Indicator
ASSEMBLY & INSTALLATION
1. Remove the exterior and interior packaging. Check that the ice basket and
ice scoop are included. If any parts are missing, please contact customer
service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice
basket and clean it.
3. Place your ice maker in a location that is protected from direct sunlight and
other heat sources (e.g., stove, furnace, and radiator). Make sure it is on a
level surface with at least 4 inches of space between the back and sides of
the unit and the wall.
4. Allow two hours for the refrigerant fluid to settle in the compressor before
plugging the ice maker in.