TABLE OF CONTENTS SECTION 1. IMPORTANT SAFETY INSTRUCTIONS 1.1 Important Safely Instructions Cn a ee SECTION 2: PREPARING YOUR ICE MAKER 2.1 Important Sally TIDE commas comma chess sons 2 SECTION 3: GETTING TO KNOW YOUR ICE MAKER ; 31 Knowing Your 108 Maker ...iweemsimmmssonmaimsssrs some 3.2 The Control Patel ul caisson dins SECTION 4: GETTING YOUR ICE MAKER READY FOR USE ; 4.1 CRACKLING TOUT 108 SICKBED corp sass chess suspense sy again sss s srs chess possessives : 4.2 Electrical Shook Hazards.
SECTION 1 IMPORTANT SAFETY INSTRUCTIONS 1.1 IMPORTANT SAFETY INSTRUCTIONS Your safety and the safely of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. A This Is the safety alert symbol, All safety messages will follow the safety lent symbol and dither the word "DANGER" or "WARNING" These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions.
SECTION 2 PREPARING YOUR ICE MAKER FOR USE 2.1 IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock and injury to persons or damage to properties. Read all the instructions before using any appliances. = Do not operate this ice Maker if it has a damaged cord. « No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.
SECTION 3 GETTING TO KNOW YOUR ICE MAKER 3.1 KNOWING YOUR ICE MAKER The diagram below shows you the basic pairs of your [ce Maker. lee shovel lee scoop lee basket cilantro panel Water drain off cap Water reservoir {inside) 3.
SECTION 4 GETTING YOUR ICE MAKER READY FOR USE 4.1 UNPACKING YOUR ICE MAKER 1. Remove the Ice Maker out of the box. Throw away all plastic bags. Do not throw the box away. Keep i al a proper place. You may need it for future storage, 2. Check the parts. There should be total 3 main parts in the package: Ice Maker, ice basket and ice sou. Remove all the tape in the unit, Use lukewarm water and soft cloth to clean the interior of the Ice Maker, the ice basket and the ice scoop. 5.
SECTION § OPERATING YOUR ICE MAKER 5.1 TO OPERATE YOUR ICE MAKER 1. Select the size of the ice cube by pressing the “Select” button. If the room temperature is lower than 60, it is recommended to select the small or medium ice sign button in order to avoid ice sticking together 2. Open the cover, remove the ice basket and pour water info tank. Keep water level below the level mark 3. Press ‘Power’ button on the control panel to begin the ice making cycle. 4.
SECTION 7 Seems NDE Cel eel lee Inner tank lee-making box Evaporator assembly Bottom base Condenser BOC12v/Fan blade Rear protection board Electrical box Rear strengthening board Rubber feet with boils Main control PVE Transformed Power cord clipper Synchronous motor Back down cover PARTS BREAKDOWN DIAGRAM inner tank fixing piece Micro switch ice shovel Electromagnet valve assembly Refrigerant dry filler Front panel Walter draining assembly Rear panel Support for sensor ice basket Back up cover Front up cov
SECTION 8 ELECTRICAL DIAGRAM 00 ied Bon oh WR PIC Starter Compressor Overload protector Electromagnetic Valve Synchronous Motor BC water pump BC fan Transformer Relay Relay Relay Operation PCB meu Micro switch No.1 Micro switch No.
