Coway Air Purifier AP-1008DH his product is for domestic use only.It cannot be used in an ·T overseas country where the power voltage is different. arranty card is included in this user’s manual.
FEATURES 1. MCCTM medium filter This is a versatile filter which removes the yellow dust that occurs during the spring season as well as toxic gases, viruses and bacteria such as influenza, legionella, etc. MCC TM medium filter 2. Pollution level indicator/ mood lamp It has the function showing in the pollution level indicator by sensing the pollution of the indoor air automatically and added up to the interior-wise function. 3.
DEAR CUSTOMERS FEATURES Thank you for using the coway air purifier. Please read the user’s manual to use and maintain the product correctly. If you encounter a problem while using the product, you may easily solve the problem by referring to the user’s manual. As this manual contains the product warranty card, please keep it in a safe place.
SAFETY INFORMATION The following information is for user safety that should be observed. It is to ensure user safety and prevent property damage. Please read the precautions carefully and use the product correctly. If not observed, serious physical If not observed, serious physical If not observed, minor physical injury or property damage may injury or property damage may injury or property damage may Danger occur as a result. Warning occur as a result. Caution occur as a result.
R emove any dust or water from the power plug. Otherwise electric shock or fire may occur as a result. Otherwise fire may occur as a result. U nplug the product if it is not to be used for a long time. Do not attempt to repair or modify the power cord. Otherwise electric shock or fire may occur as a result. Otherwise electric shock or fire may occur as a result. I f the power cord is damaged, do not replace the cord yourself. Call coway service center to have it replaced.
SAFETY INFORMATION .BJOUBJO B EJTUBODF W hen the product is in use, maintain a distance of at least 20 cm from walls or adjacent objects and 30 cm - 60 cm above the product. "JS DJSDVMBUJPO I nstall the product where no obstacles around the product block the circulation of air. Otherwise walls, ceilings, or surrounding objects may be contaminated. U se the air purifier away from lighting devices or direct sunlight. I nstall the air purifier at least 2 m away from electronic products such as tv.
U nplug the product before you clean it. Do not clean the product by applying water directly to the product or using benzene or thinner. Otherwise electric shock or fire may occur as a result. D o not stick fingers or foreign objects into the air inlet or outlet. Do not let children hang on to the product or climb on it. Otherwise physical injury or product malfunction may occur as a result. Otherwise physical injury or product malfunction may occur as a result.
PARTS NAME Front Rear < AP-1008DH > Display part/ operation part Pollution level indicator/mood lamp Speed indicator Air outlet Pollution sensor unit Handle Filter replacement reset button Power cord Others User’s manual 7
For Information AIR PURIFIED PROCESS ■P re-filter Treated with antibacterial materials, the pre-filter removes relatively large dust, mold, human hair, pet hair, and others. T his is a versatile filter which removes the yellow dust that occurs during the spring season as well as toxic gases, viruses and bacteria such as influenza, legionella, etc.
PREPARATIONS Please Check Before Use! The product is for 120 V~ 60 Hz only. Make sure to connect the power plug to a grounded electric outlet (120 V~ 60 Hz) dedicated to the product. How to install filter Tips - Make sure to remove each filter’s plastic packing before installing filters. - The product is for household use. Use the product indoors only. - When the product is not in use, remove the power plug from the electric outlet.
ඖ ඖ How to Use OPERATION / INDICATION PART Indication Part 2 PREPARATIONS 1 / Light sensor It is a sensor that detects light. 2 OPERATION/INDICATION PART 1 Speed indicator y using the speed button, it is possible to select the airflow speed in 4 steps B (Step 1 → Step 2 → Step 3 → Turbo) ∗W hen the product is in sleep mode and power saving mode, the airflow speed indicators are not turned on.
ඖ ඖ OPERATION / INDICATION PART Operation Part 1 2 5 4 3 1 Power button and its indicator 2 Use it to turn the product on/off. When the power is on, the indicator is turned on. Use it to select the automatic operation mode. When the auto mode is selected, the indicator is turned on. ∗T o turn off the power, press and hold the power button for approximately 1 second. 3 Mood button and its indicator Use it to turn mood lamp on/off . When mood lamp is turned on, the indicator is turned on.
Lightly polluted: Polluted: Highly Light purple Dark purple polluted : Red OPERATION/INDICATION PART Clean:Blue How to Use It displays the current cleanliness (pollution) level of the room. ∗T he cleanliness (pollution) level of the room is determined by the color at the end of the penetrating hole.
HOW TO USE Tips -B efore operating the product, connect the power plug to a dedicated electric outlet. -O nce the power is turned on, you will see the previously used operation mode, already set for you to use. ■ To operate the manual mode Press the power button and then select the speed of the wind by pressing the speed button. ▶ ■ To select the auto mode Press the power button and then select the auto mode button.
How to Use ■ To operate the silent mode ▶ HOW TO USE Press the power button and then the silent button. In silent mode, the airflow speed is lowered below step 1 (lower rpm), making the environment quiet and pleasant. ■T o operate the sleep mode(available only in auto mode operation) If the surroundings are dark for 3 minutes or longer in auto mode operation, the product automatically switches to sleep mode, lowering the airflow speed, noise, and electricity consumption.
ADJUST PARTICLE SENSOR How to Adjust the Sensitivity of the Pollution Sensor When the product is shipped out, the pollution sensor is set to standard sensitivity. If the pollution level stays at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour when the air does not seem clean, users can adjust the sensitivity of the pollution sensor as follows. 1. With the mood mode button pressed down, insert the power plug in the electric outlet. 2.
Tips How to Use CLEANING METHOD - Always unplug the air purifier before cleaning the product. - Do not use detergents that contain organic solvents (solvent, thinner, etc), bleach, chlorine, or abrasives. - Do not put the air purifier in water or spray water directly on it. 1. O pen the pollution sensor cover on the right-hand side of the product. Clean the air inlet and outlet vent and then the pollution sensor with a soft brush or vacuum cleaner. 2.
CLEANING METHOD Tips - Always unplug the product before cleaning the filter. - The pre-filter is reusable by removing dust or cleaning it with water. - If the pre-filter is not cleaned for a long time, the product performance may deteriorate. - The HEPA filter are not reusable with cleaning. Never clean them with water. ■ Cleaning the pre-filter (every 2 ~ 4 weeks) 1. Open the front cover by pulling out the end part above the air inlet. 2. Take out the pre-filter by pulling out on the handles.
Maintenance FILTER REPLACEMENT ■ How to replace filters ■ Filter cleaning and replacement cycles cycles method Every 2~4 weeks Every 4 months Every 12 months Every 12 months Cleaning and washing Replacement Replacement Replacement MCCTM medium filter Deodorization filter HEPA filter ∗ Each service life is based on 24-hour use in auto mode. ∗ The recommended filter replacement cycles may differ depending on the operating environment. ■ Filter replacement indicator 1.
TROUBLESHOOTING The air purifier may operate abnormally not because of the product malfunction but because of minor causes or the fact that the user is not familiar with the product use. In such a case, problems can be solved easily even without the help from the service center just by checking the following. If the problem still persists after you check the following, contact the service center. Symptom No air is blowing.
SPECIFICATION Model AP-1008DH Rated voltage 120 V~ 60 Hz Phase 1 Power consumption 47 W Grade 2 device Dust collection mode Mechanical dust collection method (HEPA filter) Safety feature Power is shut down when the front cover is opened. Installation place Indoor use Maximum volume of air 5.0 ㎡/min Size 354 mm(Width) × 194 mm(Depth) × 645 mm(Height) Weight 7.
AP-1008BH/CH/DH 21
Others WARRANTY CARD USA Add : WOONGJIN COWAY USA, INC. 695 SOUTH VERMONT, STE.
www.coway.
