AWR-1600DB 160 Bottle Built-In Compressor Wine Cooler OWNER’S MANUAL Read and save these instructions. Manual v1.
A Name You Can Trust Trust should be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Register Your Product Online............................................................................... 4 Safety Information & Warnings .............................Error! Bookmark not defined. Parts List .................................................................Error! Bookmark not defined. Assembly & Installation ....................................................................................... 7 Operating Instructions .................
REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications Special Promotions Opt-in for NewAir promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: register.newair.
SAFETY INFORMATION & WARNINGS When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips: Attention: To avoid the risk of child entrapment, do not allow children to operate, play with, or crawl inside the unit.
PARTS LIST newair.
ASSEMBLY & INSTALLATION HANDLE ASSEMBLY Tools Required for Assembly: Phillips screwdriver (not included) Estimated Assembly Time: 5 minutes Before installation, attach the handle to the front of the unit with the included screws. It may be necessary to push aside the rubber seal on the inside of the door to reveal the screw holes. Caution: Avoid over-tightening the screws, or you may cause damage to the unit.
REVERSING THE DOOR SWING The door hinge is on the left side by default. If you wish to reverse the swing so that the door opens from the right, it is important to have at least one other person to help. It is dangerous to try to reverse the door swing by yourself. 1. 2. 3. 4. 5. Unscrew the upper door hinge while the second person supports the door. Remove the upper hinge and carefully lift the door off the bottom hinge. Unscrew the bottom hinge and install it on the left side of the unit.
OPERATING INSTRUCTIONS HOW TO USE THE BUTTONS ON THE DISPLAY PANEL Select Celsius or Fahrenheit temperature scale. Raise the desired temperature.* Turn the light on and off. Lower the desired temperature. * * To set the upper zone temperature, press the UP or DOWN button on the left side of the control panel. The interior temperature of the upper zone can be adjusted in increments of 1 degree between 40°F and 50°F.
THE DISPLAY SCREEN 1. 2. 3. 4. 5. 6. 7. Indicates the working status of the entire unit Indicates the working status of the lower zone Shows set temperature of the lower zone Celsius or Fahrenheit degrees Actual temperature of the lower zone Celsius or Fahrenheit degrees Lower Zone 8. Celsius or Fahrenheit degrees 9. Upper Zone 10. Actual temperature of the upper zone 11. Indicates the working status of the upper zone 12. Shows set temperature of the upper zone 13. Celsius or Fahrenheit degrees 14.
CLEANING & MAINTENANCE CLEANING YOUR COOLER To clean your cooler: • • • • Unplug the cooler and remove anything inside. Wash the inside of the unit with a solution made of warm water and baking soda solution (2 tablespoons of baking soda to one quart of water). Unscrew the water reservoir at the bottom of the unit and rinse with water. To clean the outside of the unit, use a mild detergent and warm water. MOVING YOUR COOLER To move your cooler: • • • • • Remove anything stored inside.
WINE STORAGE GUIDE • • • • • The ideal temperature for storing red or white wines is 55°F, with humidity between 60% and 75% RH. Store corked bottles on their sides, to keep the cork from drying out and allowing air into the bottle. UV rays make wine age faster, so keep bottles out of direct sunlight. Avoid heavy vibrations from motors, etc. Store wine separately from strong odors that might contaminate the flavor of the wine.
TROUBLESHOOTING Problem Wine cellar does not operate. Wine cellar is not cold enough. The light does not work. The cooler vibrates while operating. The cooler produces a lot of noise. The door will not close properly. Possible Causes The unit may be plugged in using a different voltage. The circuit breaker may be tripped or there is a blown fuse. The external environment may require a higher setting. The door may be opened too frequently. The door is not closed completely.
Problem Possible Causes The door is not properly installed. The seal is weak. The shelves are out of position. The LED display does not work. There is an LED display error, or the LED displays “LO”. The buttons do not function. There may be a problem with the main control board. There is a problem with the plug. The cooling kit is no longer working properly. The PC Board is faulty. The temperature control panel may be damaged. newair.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
