User Manual

10
SWING FUNCTION
Press the “Swing” button to make the fan oscillate at a
range of 50 degrees, and then press it again to stop
the oscillation.
MODE SELECTION
Press the “Mode” button to select normal mode,
nature mode or sleep mode, and the LED indicator will
light up accordingly: Nature mode ( ), sleep mode
( ).
Nature mode: The fan is automatically set to match the air
conditioner, and will occasionally change speeds, mimicking a
natural breeze.
Sleep mode: The fan speed changes at regular intervals to
provide a comfortable sleeping environment. In sleep mode, the
high, medium, and low speeds will all be cycled through.
Note: In nature mode, the fan speed button is not available, so
the speed indicator will not light up on the top control panel.
FAN SPEED SELECTION
After the power is turned on, the fan will begin in
normal mode. You can press the “Speed” button to
change the fan speed to high, medium, low, and silent.
The LED indicator will light up accordingly: High → Medium →
Low → Quiet
Note: If you select the low speed, the motor will start at medium
speed for a few seconds and then switch to low speed.
When the fan is turned on in standby state, all functions except
timer and sleep mode have memory settings.