User Manual

11
CLEANING AND MAINTENANCE
1. When cleaning, use ordinary detergent and a soft brush. Do not
use chemical agents for cleaning.
2. Always unplug the power cord before cleaning the device to
prevent possible electrocution.
3. If dust accumulates on the outer surface of the unit, please wipe
with a damp soft cloth. Use a water and a soap mixture to clean
the exterior.
4. Remove the cooling pad from the unit and check to make sure
the cooling pad is in good condition. If the pad is cracked, it will
need to be replaced. Wipe the interior clean with a damp soft
cloth.
5. Rinse the cooling pad completely with clean water. Use a soft
cloth to dry.
6. For a more thorough cleaning, use a mixture of water with a
couple teaspoons of distilled white vinegar or lemon juice.
7. Do not use gasoline, thinner, or any substance that may damage
the unit
8. Change water in the water tank regularly. Wipe the tank clean
and use your diluted vinegar solution to remove any hard water
stains in the tank.
9. Make sure the tank is completely dry and free of any leftover
vinegar residue before using the unit again.
10. Be careful handling the appliance while cleaning, as working
around the appliance with wet hands may cause electric shock.
11. After cleaning, ensure the outer dust filter, cooling pad and
water tank are correctly installed before use.