User Manual

7
OPERATING INSTRUCTIONS
Remove the product from the packaging and review the
instructions and other included accessories. The unit can be used
immediately after being removed and unpacked.
FILLING THE WATER TANK
We recommend filling your water tank first before operating the
unit, so that the evaporative cooling will be functional right
away. The water tank can be pulled out of the bottom of the
back of the unit, and filled up to the max fill line. Your unit comes
with ice packs, which will help the cooler put out even colder air.
(Do not break open or modify ice packs in any way—ice packs
already contain a freezing gel and do not need to be opened.
Place ice packs in the freezer overnight prior to use, for
maximum cooling effect. Frozen ice packs should be placed
directly into the water tank, on the left side, facing the back of
the unit. Ice packs must only be placed on the left side, or they
might obstruct or damage the water pump.)
Once the water tank is full, press the On/Off button. Then, press
the Cooler/Humidifer button to turn on the water pump. The
water pump will enable evaporative cooling, as it draws water up
and runs it through the cooling pad.
USING THE REMOTE CONTROL
One battery (CR2032 3V) is used in the remote control. Please
insert the battery into the remote control tightly based on the
direction of the polarity. If the remote will not be used for a long
time, please remove the battery and store safely.
Used batteries should be disposed of properly, and kept away
from children. Please note that even used batteries could be
hazardous.