EC300W Evaporative Air Cooler OWNERS MANUAL Read and save these instructions. .
A Name You Can Trust Trust should be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS. TABLE OF CONTENTS Specifications ....................................................................................................... 3 Register Your Product Online ............................................................................... 4 Safety Information & Warnings ........................................................................... 5 Parts List ..........................................................................................................
REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications Special Promotions Opt-in for NewAir promotions and offers Registering your product information online is safe & secure and takes less than 2 minutes to complete: Register.NewAir.
SAFETY INFORMATION & WARNINGS In order to use the product conveniently and to avoid any danger caused by wrong operation, please pay close attention to the warnings and instructions in this manual. • • • • • • • • • • • The appliance is only for household and indoor use. WARNING: Unplug or disconnect the appliance from the power supply before user servicing or cleaning operation. This appliance has a polarized plug (one blade is wider than the other).
• • • • • • • • • • • Exception handling; If you perceive an unpleasant smell or hear abnormal noises during use, immediately stop using and unplug from the power source. Do not use exposed or damaged power cord. It may cause electric leakage, short circuit, or fire. If the power cord is damaged, it should be replaced by the manufacturer, authorized service center, or qualified personnel in order to avoid hazard. Do not bend the power cord or place heavy objects on it.
PARTS LIST 1. Water filling box cover 2. Top cover 3. Left cover 4. Water pump (raised) 5. Water pump (lowered) 6. Water tank latch 7. Water tank 8. Casters 9. Remote control receiver 10. Horizontal louver 11. Front cover 12. Vertical louver 13. Back cover 14. Right cover 15. Power cord reel 16. Water gauge 17. Remote control 18. Dust-proof filter 19. Cooling pad 20.
FEATURES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
OPERATING INSTRUCTIONS After taking out the product, first remove the pump paddle button as shown in Fig. 1, then slide the pump paddle to the bottom so that the pump extends down into the tank and allows normal operation. (Fig. 1) (Fig. 2) FILLING THE WATER TANK 1. 2. You need to add water to the tank if the cooler/humidifier function is turned on. The water can be filled from the top and by taking out the water tank.
Open water filling cover (Fig. 3) 3. Fill water (Fig. 4) Removing the water tank: Before adding water, first loosen the buckles on both sides, slide the pump buckle to move the pump to the tank top, take out the unit, then slowly pour water into the tank with a kettle (Fig. 5 & 6). After adding water, put the unit on the water tank, fasten the tank buckle, and slide the pump buckle to the tank bottom. (Fig. 5) (Fig. 6) http://www.NewAir.
4. For manual water filling, please note the level indicator in front of the air cooler (Fig. 7) a. Do not fill the water exceeding the maximum water level (Fig. 7). b. Please remember to use clean tap water. c. Tip: It is normal, non-toxic, and will not affect your health if the device has slight odor or the water in the tank has a slight discoloration when it is used for the first time. (Fig. 7) USING THE REMOTE CONTROL The EC300W is equipped with a remote control.
THE CONTROL & DISPLAY PANELS Note: The buzzer beeps twice when the power is first turned on, and the unit enters the standby state (power on sound: BiBi, button pressing sound: Bi, power off sound: Bi--). All buttons except On/Off are invalid. ON/SPEED & OFF BUTTONS 1. 2. 3. In standby mode, all buttons except On/Off are invalid; press the On/Off to turn on the unit and it starts working.
COOLER/HUMIDIFIER BUTTON When the unit is on, press this button to turn on/off the cooler/humidifier function. Press this button once to turn on the cooler/humidifier function, the pump turns on, and the cooler/humidifier LED turns on; press this button again to turn off the cooler/humidifier, and so on.
c) Sleep: In natural sleep mode, the wind speed LED changes with the 30minutes cycle change and does not change with the change of natural wind.
SEPARATION POWER OFF FUNCTION When the water pump is taken out from the tank, it turns off immediately. Humidifier function is invalid, while other functions are normal. FILTER DRY a) After using the cooler/humidifier function, if you want to dry the cooling filter before packing, you can press the “speed” button for 3s to start the filter dry function. b) When filter dry function starts, the wind will run at high speed for 20 minutes and other functions are not available at the same time.
PREVENT LONG TIME ACCIDENTAL WORK a) This function can prevent the unit from long time work if the user forgets to turn off the unit or goes out when the power is cut and the power is restored later. b) This function requirement is as follows: The unit turns off automatically after continuous work of 15 hours if the timer is turned off. If the timer is turned on, the unit turns off at the set time.
CLEANING AND MAINTENANCE 1. 2. 3. 4. 5. Do not use chemical agents for cleaning. Turn off the power and unplug the power cord. Always unplug the power cord before cleaning the device, or else it may cause electrocution. If dust is accumulated on the surface, please wipe with soft cloth: if the surface is dirty, mix water lower than 122°F and neutral detergent, wipe with soft cloth and dry. Do not use gasoline, thinner, or any substance that damages the surface easily for cleaning. PRODUCT STORAGE 1.
TROUBLESHOOTING Problem Possible Causes Solution The unit does not cool. There is insufficient water in the tank. Check the water level in the tank and make sure there is enough water. Check the water pump to make sure it is lowered all the way to the bottom, then press the COOLER/HUMIDIFIER button. Press the COOLER/ HUMIDIFER button. The water pump is not lowered all the way to the bottom. The cooler/humidifier button was not pressed. The pump is defective. The unit does not cool on high speed.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
