Installation Guide

17
A Name You Can Trust
CLEANING AND MAINTEN ANCE
1. Do not use chemical agents for cleaning.
2. Turn off the power and unplug the power cord.
3. Always unplug the power cord before cleaning the device, or else it may
cause electrocution.
4. If dust is accumulated on the surface, please wipe with soft cloth: if the
surface is dirty, mix water lower than 122°F and neutral detergent, wipe
with soft cloth and dry.
5. Do not use gasoline, thinner, or any substance that damages the surface
easily for cleaning.
PRODUCT STORAGE
1. If the product won’t be used for long, remove the water tank, drain the
water, and then install the unit properly. Turn on air dryer function, fully
dry the wet curtain, unplug the power cord, pack the unit properly to
prevent dust, and place in a dry and ventilated place.