MINIDRYER36W Portable Dryer 3.6 Cubic Feet OWNERS MANUAL Read and save these instructions.
A Name You Can Trust Trust has to be earned and we will earn yours. Customer happiness is the focus of our business. From the factory to the warehouse, from the sales floor to your home, the whole NewAir family promises to provide you with innovative products, exceptional service, and support when you need it the most. Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
READ AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Introduction ..................................................................................................................... 2 Need to Contact Us .............................................................................................. 2 Table of Contents ............................................................................................................ 3 Product Specifications .........................................................
IMPORTANT SAFEGUARDS WARNING: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury. FOR YOUR SAFETY Read all instructions carefully, even if you are familiar with the appliance.
Do not reach into the appliance if the drum is moving. Do not place items that have been soiled with flammable liquids inside the dryer without washing them with detergent thoroughly before hand. Do not excessively bend, stretch, twist, or bind the power cord, or place heavy objects on it. Do not install in a tight fitting cabinet. Do not overload the tumble dryer.
Clean lint screen before or after each load. Do not dry unwashed items in the tumble dryer. Items that have been soiled with substances, such as cooking oil, acetone, alcohol, petrol, kerosene, hair care products, spot removers, turpentine, waxes, and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer. This will reduce, but not eliminate the hazard.
Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not place the dryer on carpet, as this will block the intake. It must be placed on firm horizontal ground. There should be at least 4 inches between the dryer and the walls. WARNING: This dryer cannot be used upside down.
INSTALLATION INSTRUCTIONS WARNING: This dryer cannot be used upside down. WHERE TO PLACE YOUR DRYER Place the dryer in a dry, well ventilated area. It should be positioned away from heat and direct sunlight. If the dryer is not wall mounted, it must be placed on firm horizontal ground. Do not place the dryer on carpet, as this will block the intake. There should be at least 6 inches between the dryer and the walls. The dryer comes with fixed legs that need to be assembled to ensure stability.
2. Fix the wall hanging brackets (two supplied) to the wall securely (i.e., into the stud.) Fit a timer slat between the studs to mount the brackets onto if the stud position is too wide. 3. To install the hanging hook to timber, start at Fig. 2. 4. Align the hanging hooks and fasten the screws tightly. 5. Install the Exhaust Connector. Adjust the direction to suit the installation (as per Fig. 3). 6. Rotate the Connector clockwise to fix the pipe to the Connector Base. Tighten.
7. Use 4 x 12mm screws (provided) to fix the 2 spacers as per Fig. 4. 8. With assistance, mount dryer on wall bracket. See Fig. 5 OPERATING YOUR DRYER ELECTRICAL REQUIREMENTS The unit is required to be plugged into a three pin socket that is reliably grounded. The power supply must be 120V. Plus the power cord into the socket. LOADING THE DRYER It is recommended that items are placed into the dryer one at a time. This ensures they are not tangled, which results in uneven drying.
TIPS BEFORE DRYING Prior to loading the dryer, check that the items do not have the following symbols anywhere on them. If they do, do not tumble dry these items. Check that the items that are going to be dried do not have combustible materials or foreign objects within them (i.e., lighters, hair pins, coins.) Turn items with zippers inside out and fasten buckles. Dryer heat may permanently set stains, ensure you check prior to drying that stains are removed.
CONTROL PANEL FUNCTIONS HEAT SELECTOR BUTTON Select HIGH for items that are particularly bulky or large quantities. Select LOW for delicate items, such as silk, nylon, linen, etc. DRYING PROGRAM SELECTOR OPERATION PRECAUTIONS Delicate items should be placed into a nylon net bag prior to drying. It is not recommended to dry underwire bras in this unit. Ensure that foreign objects do not find their way into the dryer. All pockets should be emptied, buttons, buckles, and zips fastened.
against the turning drum. Do not add items into the dryer while it is in operation. If drying large items, such as a blanket, it is recommended that from time to time, you open the dryer door, shake the items, place the item back in the dryer and close the door. This will ensure even drying. If any of the labels shown are on items that you are going to place in the dryer, do not place in the dryer, for it may damage the item. Electrical Requirements: A three pin socket must be used (reliably grounded.
Items that have been previously cleaned in, washing in, soaked in or spotted with petrol/gasoline, dry cleaning solvents, or other flammable or explosive substances should not be placed in a tumble dryer. Highly flammable substances commonly used in domestic environments include but are not limited to: acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some brands), turpentine, waxes, and wax removers.
2. Cleaning the filter. Separate the “exhaust vent shroud,” the “lint filter,” and the “exhaust filter.” Clean the lint on the lint filter and exhaust filter with a soft brush or vacuum cleaner. Do not damage the filters (as shown in Fig. 2.) 3. Re-installing the filter. After cleaning the filter, assemble in the sequence of the “exhaust filter,” the “lint filter,” and the “exhaust filter.” Alight the recesses in the center with the projection in the center of the drum.
TROUBLESHOOTING Review the following pages before calling for service.
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
