Use and Care Manual

CONTROL PANEL AND REMOTE CONTROL

1. Power button

Press this button to turn the unit on and off.

2. Mode button

Press this button to cycle between the 3 modes: cool (full A\C cooling with

temperature setting), fan (just fan operation without any temperature

setting) and dry (fan operation plus dehumidification). In dry mode, water

will collect inside the unit, and must be drained by removing the plug from

the bottom of the back of the unit. If the tank is full, “FL” will appear on the

display to indicate that it needs to be drained. In dry mode, the unit will

stay on low fan speed, and maintain a temperature of 62 degrees.

3. Temperature buttons

Press these buttons to increase and decrease the set temperature. Press

these buttons simultaneously to switch the temperature setting between

Fahrenheit and Celsius. This can also be switched by pressing the C/F button

on the remote control.

4. Speed button

Press this button to switch between the two fan speeds, high and low.

5. Timer Button

Press this button to set the unit to turn off after a specified amount of time.

Pressing this button while the unit is turned off will allow you to set the unit

to turn on after a specified amount of time. The timer can be set anywhere

between 1 and 14 hours.

6. Time/Temperature Display

This window displays the set temperature, or the set time while using the

timer function.