Use and Care Manual

CLEANING & MAINTENANCE

CLEANING AND STORAGE

It is recommended that the heater be cleaned at least once every few months

in order to provide the optimum level of performance. Always turn the power

switch off and unplug the heater before cleaning. Be sure to save the box for

off-season storage.

1. Turn the heater off, unplug it, and wait for the heater to cool down.

2. Use a dry cloth to clean only the external surfaces of the heater (Do not

use any cleaning agents or detergents, and never immerse the heater in

water).

3. Remove the dust filter and pad, using a vacuum or cloth to clean off the

dust, or rinsing with water and drying completely before placing back onto

the heater.

4. Pack the heater in the original box and store it in a cool and dry place.

SAFETY PROTECTION

Overheat protection: This heater includes an Overheat Protection System that

shuts the unit off if it overheats due to abnormal conditions (the inside of the

unit reaching 185 degrees Fahrenheit). If this occurs, the heater will shut itself

off. You should then unplug it, and inspect and remove any objects on or

adjacent to the heater. Allow it to cool for a few minutes, plug it back in, and

resume normal operation. If the issue persists, contact customer service

immediately.

READ AND SAVE THESE INSTRUCTIONS