User's Manual

10
www.inewchip.com
Unselect:Tap this button to unselect all checked data streams.
OK:Con󽗉rm current operations.Tap"OK"after selection,and then the system will display
the dynamic data of selected data streams.
Screen buttons<more>:
Graph:Displays the parameters of the selected data stream in waveform.
Report:Tap this button to save the current data stream value.
Record:Used to record diagnostic data for user playback and viewing.To stop reading,tap
Stop (progress bar).
With 3 display modes available,you can browse it with suitable ways:
Figure:Displays parameters with wave patterns.
Value:The default display mode shows parameters with numbers and lists.
(Tips:If the value of the data stream is not within the standard value range,the data stream will be displayed in red. )
Combine:The graphs are presented together for users to make comparisons.
(Tips:Di󽗈erent data stream options are marked in di󽗈erent colors.)
How to view a single waveform chart ？
Tap the button to display the data stream in a waveform chart.Tap to display the current
(individual) data stream in a waveform pattern.
On the waveform chart display page,the user can do the following actions.
[Max / Min]:Tap more to set Max/Min value.Once the running value exceeds the set value,
the system will warn.