User's Manual

www.inewchip.com
Data and Software Protection
Do not delete unknown 󽗉les or change the names of 󽗉les or directories created by others,
otherwise the device software may not run.
Tips: Access to network resources makes the device vulnerable to computer viruses, hackers, spy-ware, and other
malicious behaviors, and may damage the device, software, or data. To make sure that you are using 󽗉rewalls,
anti-virus software and anti-spy-ware software to provide adequate protection for your computer and keep these
software up to date.
Precautions on Using this Tool
The ignition switch should be in the OFF position when plugging and unplugging the
diagnostic connector.
Precautions on Operating Vehicle's ECU
• Do not disconnect battery or any wiring cables in the vehicle when the ignition switch is
on, as this could avoid damage to the sensors of the ECU.
• Do not place any magnetic objects near the ECU.
• Disconnect the power supply to the ECU before performing any welding operations on
the vehicle.
• Be extreme caution when performing any operations near the ECU or sensors. Ground
yourself when you disassemble PROM, otherwise ECU and sensors can be damaged by
static electricity.
• When reconnecting the ECU harness connector, be sure it is attached 󽗉rmly, otherwise
electronic elements, such as ICs inside the ECU, can be damaged.