NewCommWorld NLM155A1 15.1" Color TFT-LCD Monitor Operation Manual Rev.
NLM155A1 COLOR TFT- LCD Monitor OPERATION MANUAL CONTENTS Safety Precautions … … … … … … … 3,4 International Standards … … … … … …5 Supplied Accessories … … … … … … … 6 Preparation … … … … … … … … … … … … 7 Monitor Installation OSD Usage OSD Buttons … … … … … … … … … … 1 1 Basic OSD Usage … … … … … … … 12 OSD Operation … … … … 13, 14, 15, 16 Before Calling for repair service … … 1 7 … … … … … 8, 9, 10 Specifications … … … … … … … … … … 18 Warranty Card … … … … … … … … … … 1 9 Rev.
Safety Precautions Improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your color TFT-LCD monitor product, please read the following precautions carefully before using the product. * All operating instructions must be read and understood before the product is operated.
Safety Precautions (Continued) *Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. *Unplug the power cord from the AC outlet if you do not use the product for considerably long time. *Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. *Keep the product away from direct rays of the Sun-light.
International Standards FCC CAUTION : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Supplied Accessories Please check the following accessories are provided with the product. NewCommWorld TM390 ... XGA NLM155A1 TM400 ... SXGA 15.1' Color TFT-LCD Monitor Operation Manual Rev. B Operation Manual (x1) Monitor Driver Diskette (x1) AC Adapter (x1) AC Cord (x1) Option PC Stereo Cable (x1) PC VGA Cable (x1) Option Wall Mount Bracket (x1) / Screws (x4) 6 Rev.
Preparation Rear view of main unit (Cable Connection) Power input (DC 12V) ANALOG RGB (PC) HEADPHONE (Option) PC SOUND IN (Option) 1 Turn off all equipments first. 2 Connect the adapter power cord to main power connector. 3 Connect DC output adapter to monitor DC input connector. 4 Connect analog 15-pin VGA cable between PC and monitor. 5 Make sure all the cables and power cord are well connected then, please turn on the power. Note: Monitor speaker is option item. Rev.
Monitor Installation 1 Double click [Control Panel ] icon 2 Double click [Display] icon from [Control Panel] folder. from [My Computer] folder . 8 3 Select [Settings] in [Display Properties] 5 Select [Monitor] in the window shown window. 4 Click [Advanced...]. 6 Click [Properties]. above. Rev.
Monitor Installation (Continued) 8 [Upgrade Device Driver Wizard] will be appeared. Select the second list and then click [Next>]. 7 Select [Driver] and then click [Update Driver...]. 10 Select drive [A:]. 9 Click [Have Disk...]. Rev.
Monitor Installation (Continued) 11 Select the file of NEWCOMMMONITOR.inf . 12 Choose NEWCOMM NLM155 and then click [Next>]. NEWCOMM NLM155 NEWCOMM NLM155 13 10 Click [Next>] to start installing the selected monitor. 14 Click [Finish]. (Be sure the screen shows correct model name.) Rev.
OSD Buttons OSD Buttons Control Panel on the front of main unit 6 Power Indicator 1 Menu 3 Power 2 Exit 5 Move up 4 Move down 1 MENU : Display the main menu screen and select items. 2 EXIT : Move to the previous menu screen or exit from menu 3 POWER : Monitor power on / off 4 DOWN : Move the cursor down or decrease value. 5 UP : Move the cursor up or increase value. 6 POWER INDICATOR screen.
Basic OSD Usage Main Menu Screen Main Menu Auto Adjust Brightness Contrast Setup Volume Main Menu Items Display Information 1024 x 768 : Display Resolution 60 Hz : Vertical Frequency (Refresh Rate) 1024 x 768 @ 60 Hz -V1.0 V1.0-- BIOS Revision No. Main Menu Auto Adjust Brightness Contrast Setup Volume Scroll Bar Value Basic Menu Operation 1 Press the Menu button to display the OSD menu screen. 2 Press the button to move the cursor to desired menu item.
OSD Operation (Main Menu Items) Main Menu Auto Adjust Operation *Select Auto Adjust then progress adjustment automatically *Automatically adjusted items are bellow 1) Contrast 2) RGB Adjust 3) Horizontal Position 4) Vertical Position 5) Phase 6) Clock If you select "Auto Adjust", you will lose current data settings listed abobe. Brightness * Press MENU button for scroll bar. * Adjust Brightness value by pressing the button. Contrast * Press MENU button for Scroll bar.
OSD Operation (Setup Menu Items) Sub-menu name Operation Sharpness *Press MENU button for sub-menu screen. *Select Sharpness by pressing the button. Sharp : For more clear feature. Medium : Normal feature. Smooth : Show smoother Image with moving feature. Color Color Temp *Press MENU button for sub-menu screen. *Select Color Temperature by pressing the button. Normal Cool Medium Warm RGB Adjust *Press MENU button for sub-menu screen. *Select Red, Green or Blue by pressing the button.
OSD Operation (Setup Menu Items) Sub-menu name Image Setup Operation Vertical Position *Press MENU button for Scroll bar. *Adjust Vertical Position of screen by pressing the button. Press button : Move down Press button : Move up Video Video Please use this option just in the case of having vertically unmatched picture after operating the "Auto Setup". Phase * If a noise remains on the screen after operating the "Auto Setup", adjust phase value by pressing button.
OSD Operation (Setup Menu Items) Sub-menu name OSD Setup Operation Vertical Position *Adjust the Vertical Position of OSD menu screen Press button : Move down the OSD menu box Language Press button : Move up the OSD menu box Transparency *Adjust the Transparency of OSD menu screen Duration Time *The range of controlling the Duration time of the OSD menu is from 5 sec. up to 100 sec.. Default setting is 10 sec.. Press button : Translucent Press button : Opaque * Select the Language of the OSD menu.
Before calling for repair service... *Before calling for repair service, check the following items for possible remedies to the encountered symptoms. Problem There is no picture Check below Reference Pages • Make sure the AC adapter is properly inserted in the power outlet. • Make sure the main power button of the main unit is on. • Make sure the signal cable is free of connections. • Make sure whether the power of an external input device is on. • Make sure the display mode is set to proper mode.
Specifications NLM155A1 Color TFT-LCD Monitor Resolution 1024 * 768, XGA Color Standard Color 262,144 Colors Max, color (Dithering) Full Color Brightness 200 cd/m2(nit) Lamp life 25,000 hours Contrast Ratio 200 : 1 Viewing Angle H : 120 V : 90 Panel PC Signal (Analog RGB) Type Amorphous Si TFT-LCD Actual Display Size 307.2 * 230.4mm Diagonal Length 15.1, 383.5mm H-Frequency 30~60KHz V-Frequency 56~75Hz Signal Level 0.
Warranty Card This warranty card will not be issued, please keep this manual. Product Purchase Date Customer Name Seller NLM155A1 Name Address Phone NewCommWorld Co.
