Operation Manual LRB 7x50 LASER RANGE FINDER BINOCULAR In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 1183 Finch Ave. W.
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted. • NEVER subject the unit to impact while operating or being transported • NEVER transport the unit without the case • NEVER disassemble the unit.
9. CUSTOMER SUPPORT Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or Toll free at 1-877-398-6666. Our operating hours are 9am-5pm, Monday - Friday, Standard East Time. At no time should equipment be sent back to Newcon without following the instructions of our technical support department. Newcon accepts no responsibility for unauthorized returns.
BEFORE USE CAREFULLY READ ALL THE INSTRUCTIONS! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY! 1. BRIEF DESCRIPTION LRB 7X50 Laser Range Finder Binocular is advanced Laser Range Finder system that provides instant distance measurements consistently and accurately. The stereoscopic device provides convenient observation with both eyes. Simultaneously, the user can measure the distance to an object without loosing sight of the target.
7. TROUBLE SHOOTING The range-measuring mode does not work. Press the Action Button again. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. How can I clear last reading before making next measurement? Direct the unit’s LCD reticule at the new target, press the Action button. The new reading will appear. There are black dots in the image.
1 6. STORAGE AND MAINTENANCE INSTRUCTIONS. Patent pending Newcon Optik Made in Canada 9 10 1 – Eyepieces; 9 – Interpupillary distance adjustment lever 10- Identification Label (Located on the Bottom) Fig. 2 3. SUPPLIED ACCESSORIES LRB 7X50 is supplied in the following assembly: - Device - Carrying Case - Neck Strap - User’s manual - Warranty card - 9V battery (optional) 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc.
• TARGET REFLECTION MED - when the number of steady received reflected signals is in medium range and enough to make positive conclusion about the measured distance; • TARGET REFLECTION HIGH - when the number of steady received reflected signals is qualified to be enough to make reliable conclusion about the measured distance. The displayed statistical qualification of the reflected signal characterizes variation in expected accuracy of measurements.
2. Range Finder Type Measuring Range, m Accuracy, m Resolution, m Measurement time, sec Meters/Yards display Last 10 readings recall Reticule shape ( + or □) Target quality indicator Scan Mode Speed Finder 3. M i s c e l l a n e o u s Battery Battery capacity 'Low Battery' Indicator Covering Construction Tripod thread Operational Temperature Range Storage Temperature Range Shock, g Vibration, Hz Dimensions, mm Weight, kg Class 1 eye safe, 905nm 20-1,500 ±1 ± 0.
b. Mode selection state Pressing MODE button (5) (fig. 1) when the System is in READY mode brings the System to the Mode selecting state. Pressing the Mode button can sequentially scan the Modes. The Mode under selection is being indicated on the Display by flashing of the selectable feature. The "flashing" feature can be selected by pressing the Action button (6). The System operates in the setting Modes, which are displayed as follows (refer to fig.3): Y/M – units of measurement: yards or meters (3). 5.
5.1. Preparing the Device for Operation • Unbolt a screw and open battery compartment cover at the bottom of the device. • Insert one 9V battery (sold separately) into the battery compartment observing correct polarity. • Close up the battery compartment cover, tighten the screw. After changing the battery, it is recommended to run the CL (CLEAR) mode (refer mode selection procedure). • Take off lens caps • Look through the eyepieces (1) (fig. 1). • Adjust interpupillary distance by turning lever (9) (fig.
