User's Manual Part 1

Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your
cordless telephone. For more detailed descriptions of the operations and features
of this telephone, refer to the Content on page 1.
1.Carefully remove your cordless telephone from its shipping carton. If there is
any visible damage, do not attempt to operate this equipment. Return it to the
place of purchase.
2.Check to be sure you have all items that come with this cordless telephone
system. You should have a HANDSET, BASE UNIT,AC ADAPTER,TELEP-
HONE LINE CORD, SHORT TELEPHONE LINE CORD,BATTERY PACK,
BELT CLIP and Owner's Manual.
3.Insert the small plug on end of the AC ADAPTER into the POWER IN CONNEC
-TION JACK at the back of the BASE UNIT.
4.Plug the AC ADAPTER into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 700 mA.
5.Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE
JACK and the other end into the TELEPHONE LINE CONNECTION JACK
on the back of the BASE UNIT.
6.We recommend not placing this unit next to appliances. Doing so may cause
interference.
7.Install the HANDSET BATTERY PACK by plugging it into the BATTERY
1
1. The Caller ID name and number (if available) will display after the
first ring.
2. After 10 rings, the NTP-6451A will turn on and pick up the telephone line.
3. The NTP-6451A is now in Answer On mode.
Pausing During Playback
1. Press the key during
playback to suspend activity.
2. Press the key again to
resume activity.
Note: If still in pause mode after 1 minute, the NTP-6451A
automatically returns to standby mode.
Recording a Memo
The NTP-6451A will allow you to record memo messages up to one minute
long. The memo will be considered as a new message.
Note: If the memory is full during recording,
the unit will announce “Memory is full”
and the memo recording is ended.
1. To record a memo,
the [Memo] key
press and hold
till beep.
2. While continuing to hold the
[Memo], say your memo message.
When you finished with your memo,
release the [Memo] key.
3. The memo is stored as a new
message and the new call light
will flash.
16
Playing Back New Messages