NEWCONT NTP-3422 NEWCONT AUDIO-PHONE Operation Instructions
FCC REGULATIONS This equipment complies with FCC REGULATIONS 15 and 68 of the Federal Communications commission (FCC) rules for the United States. A label is located on the underside of the base unit containing the FCC registration number and Ringer Equivalence Number (REN). You must, upon request, provide this information to your local telephone company. This equipment is compatible with inductively coupled hearing aids. 1.
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instruction should be read before the product is operated. 2. Retain Instructions - The safety and operating instruction should be retained for future reference. 3. Heed Warnings - All warning on the product and in the operating instructions should be adhered to. 4. Follow instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning.
Multihandset Functions You may register 4 HANDSETS totally to your BASE unit. The expanded handsets (chargers) no need connect phone lines. You can place them wherever you like. When you have several handsets at your hand, you can follow below functions. Conference Call When one handset is in phone, all the other handsets will display 'LINE IN USE'. When another handset joins in the talk, all the other handsets will display 'ON CONFERENCE' Ø Inviting 1.
IMPORTANT SAFETY INSTRUCTIONS IF YOUR PRODUCT UTILIZES BATTERIES, THE FOLLOWING ADDITIONAL PRECAUTIONS SHOULD BE OBSERVED: 1. Use only the type and size of batteries specified in the users manual. 2. Do not dispose of batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4.
GUIDANCE FOR ADVANCED OPERATIONS STOPPING ALARM: Ø Press [ ALM1 ] or [ ALM 2 ] to stop ALARM. Ø Press [ STANDBY ] to stop ALARM. u Alarm will resumes at preset time next day. PAUSING ALARM (SNOOZE): Press [ SNOOZE/MUTE ] to pause ALARM, which rings again after 7 minutes until ALARM DURATION has expired Note: ALARM automatically pauses during INCOMING CALL or AUTO ANSWERING. ANSWER MACHINE SETTING ANSWER MACHINE ON/OFF: Press [ ANS ON/OFF ] to switch between Answer On or Answer Off.
GUIDANCE FOR QUICK OPERATIONS PRIOR TO USE 1) Connect the PHONE LINE CORD to the "TEL LINE" jack on the bottom of BASE UNIT and to a telephone outlet. 2) Connect the AC Power Adaptor to the 12V DC jack on the bottom of BASE UNIT and to the wall power outlet. 3) Plug the RADIO ANTENNA to the terminal on the bottom of BASE UNIT. Note:Be sure to insert the RADIO ANTENA to ensure better reception of AM radio signal.
GUIDANCE FOR ADVANCED OPERATIONS Ø Edit the name and press for deleting the wrongly entered numbers before the cursor. Note: Please refer to NAMING HANSET (P. 10) about how to entering character. Ø Press to 'PHONEBOOK'. Ø Change the number. Ø Press to save. DELETING FROM PHONE BOOK: Ø Press to access PHONE BOOK under STANDBY mode . Ø Scroll to the number to be deleted.. Ø Press AND with 'DELETED?' displayed on the screen. Ø Press to confirm.
GUIDANCE FOR QUICK OPERATIONS Deleting the Voice Message: Ø Press [ DEL ] to delete the current message during the message playing. Ø Press and hold [ DEL ] to delete all the old messages during the message playing. ALARM CLOCK There are two alarms as [ ALM1 ] and [ ALM2 ]. Ø Press [ SET ] and the text 'SET TIME?' will be displayed on the screen, scroll [ VOL ] / [VOL ] to 'ET ALARM1?'. Ø Press [ SET ] again to display 'SET AL1 HOUR', scroll [ VOL ] / [VOL ] to select.
GUIDANCE FOR QUICK OPERATIONS GUIDANCE FOR ADVANCED SETTINGS Ø Press [ SET ] to confirm and quit. Note: Directly press [ ALM1 ] to view the time and duration of ALM1, once 'ALARM1 XXMIN' and corresponding Icon appear on the screen , here " XXMIN"means the duration of the ALARM. Follow the same instruc -tions for ALARM 2. QUICK SETTING ALARM MODE & DURATION: Directly Press [ ALM1 ] or [ ALM 2 ] for quick setting alarm mode and duration. e.g.
GUIDANCE FOR QUICK OPERATIONS GUIDANCE FOR ADVANCED SETTINGS SETTING LOUDNESS: Press [ SET ] and the text 'SET TIME?' will be displayed on the screen. Scroll [ VOL ] / [VOL ] to 'SET LOUDNESS ?'. Press [ SET ] to confirm and scroll [ VOL ] / [VOL ] to select ON or OFF. Press [ SET ] to confirm and quit. Note: This setting is only for CD and RADIO. HANDSET PANEL SETTING BASS: Press [ SET ] and the text 'SET TIME?' will be displayed on the screen. Scroll [ VOL ] / [VOL ] to 'SET BASS?'.
GUIDANCE FOR ADVANCED SETTINGS GUIDANCE FOR ADVANCED SETTINGS SETTING UP BASE UNIT: SETTING AUTO ANSWER RING TIMES: The ring times can be set with a toggle switch on the bottom of BASE UNIT with three selections: 3 rings, 5 rings and TS Toll Saver 3/5 : Setting rings enables ANSWER MACHINE to automatically answer INCOMING CALLS with the corresponding rings. 3 rings: ANSWER MACHINE will automatically answer the incoming calls after rings 3 times.
GUIDANCE FOR ADVANCED SETTINGS CHOOSING LANGUAGE: Ø Press OK to access MENU. Ø Scroll to 'LANGUAGE' and press OK . Ø Scroll to the desired language (English, French, Spanish) and press to save. Ø Press to return to STANDBY mode or go to other options of MENU. CHOOSING DIAL TONE (TONE/PILSE): Ø Press OK to access MENU. Ø Scroll to 'TONE/PUSE' and press OK . Ø Scroll to the desired mode and press to save. Press to return to STANDBY mode or go to other options of MENU.