User's Manual

User Interface
Link Status
Indicator
Green : A wireless link is established between the unit and the PC.
Amber: There is no wireless link between the unit and the PC.
Flashing amber and green: Unit is in a learning process.
Data Transmission Indicator
Slow flashing green: System is idle.
Fast flashing green: Pen data is being communicated to the PC.
Off: No data is being communicated between the unit and the PC.
Power
indicator
Link Status
Data Transmission
Learn
b
utton**
** Refer to the Troubleshooting section for more info on the Learn button.
Troubleshooting
The wireless mimio module and receiver are programmed at the
factory and are packaged as a mated pair to work “out of the box”
without any user intervention. They are an exclusive pair of
components that will only communicate to one another. This allows
for more than one wireless mimio system to co-exist in the same
environment without causing confusion over which wireless module
communicates to which wireless receiver.
Since the wireless module and wireless receiver are designed to work
exclusively as a pair, you cannot casually interchange a wireless
module from one wireless system with a wireless receiver from
another wireless system and expect it to work; mixed components
will not be able to communicate unless they have been programmed
as a pair. A wireless module can only be paired with one wireless
receiver at any given point in time; you cannot program one wireless
module to work with multiple wireless receivers and vice versa. If
you own multiple wireless mimio systems and mistakenly get the
wireless module and receiver components mixed together, you can
manually re-program any pair of wireless module and receiver
components to work exclusively together through a learning process.
The learning process is described in the steps listed below.
Teach
b
utton
Learn
b
utton