User Manual

6
WPS Function
Wi-Fi Protected Setup (WPS) is a standard for easy and secure establishment of a wireless home
network, created by the Wi-Fi Alliance. The goal of the WPS protocol is to simplify the process of
connecting any home device to the wireless network.
To secure your wireless network, you could push the “WPS” button under user interface as below:
There are two ways to enable WPS connection:
1. PBC mode: Choose a Router in the list then click “PBC” button.
2. PIN mode: Choose a Router in the list and check the PIN codes are the same between Router and
Client then click “PIN” button.