User's Manual

27
Basic Function
Basic Function
26
Basic Function
Basic Function
If supported by service provider, more people can take part
in a call.
1. When there is an incoming call, press [SEND] to enter into
Answer mode.(select ‘Reject’ to reject the incoming call)
2. Press [Menu], it has 'Drop & Answer / Hold & Answer/
Reject' menus.
Select 'Hold & Answer', the screen will display both
'In call' and 'Held call'.
3. Press [Menu], then Select ‘Join’.
4. The phone displays active call indicator with the new
active call.
Hold & Switch
Switch between the active call and the held call.
1. When there is an incoming call, press [SEND] to enter
into Answer mode.
(If you select 'Reject', the call will be rejected and the
phone will return to Idle mode.)
2. Press [Menu] to display 'Drop & Answer / Hold & Answer /
Reject' menus.
Select 'Hold & Answer', then the screen displays both
'Active call' and 'Held call'.
3. Press 'Switch' to switch between the active call and the
held call.
Active call and call on hold
Switch
This allows you to switch between an active call and a call
on hold.
Press [Menu], then press ‘Switch’.
The active call will be put on hold and the call on hold will
become the active call.
Join
This allows the call on hold to join the conversation.
Press [Menu], then press ‘Join’.
Now all three parties are in the teleconference.
Transfer
This allows you to transfer the active call to the call on hold.
Press [Menu] and the press ‘Transfer’.
Now, you will be disconnected from these calls automatically.
The active call party and the party on hold will be able to
talk to each other.
* During a call, press [End : right soft key], then popup menu
appears.
It shows "End on call / End held call / End all" options.
You can select the following items:
- End on call : End a call you put on hold.
- End held call : End the current active call.
- End all : End all connected calls.