User's Manual

83
82
Message
Message
Message
Message
1. Press [ ] in the idle mode.
2. Scroll to [1.SMS] by pressing up or down navigation key,
then press [OK]. (Or press digit 1 )
3. Scroll to [6.Voice mail] then press [OK]. (or press digit 6)
* About the [Menu]
(The following options are available)
1) Number : Please enter Voice center number.
2) Listen : Press [OK] to connect to voice center.
7. Broadcast
With this menu, you can receive the broadcast messages
on general information such as weather or traffic, etc. .
For more information about topics, please contact your
service provider.
1. Press [ ] in the idle mode.
2. Scroll to [1.SMS] by pressing up or down navigation key,
then press [OK]. (Or press digit 1 )
3. Scroll to [7.Broadcast] then press [OK]. (or press digit 7)
* About the [Menu]
(The following options are available)
(1) Inbox : You can read all the received broadcast
messages.
(2) Option : Selects whether to receive the broadcast
messages or not
(3) Set language : Selects your preferred language to be
display of broadcast message.
(4) Channel list : Indicates the channel from which you
wish to receive broadcast message
8. Setting
With this menu, you can set up SMS message.
1. Press [ ] in the idle mode.
2. Scroll to [1.SMS] by pressing up or down navigation key,
then press [OK]. (Or press digit 1 )
3. Scroll to [7.Broadcast] then press [OK]. (or press digit 7)
(1) Service center :
Enables you to store or change the number of your
SMS center required when sending messages
You must obtain the number from your service provider.
(2) Expire period :
Enables you to set the length of the time for which your
messages are stored at the message center while
attempts are made to deliver them .
Selects the period in which the service center tries to
deliver the message.
1 hour, 6 hours, 12 hours, 24 hours, 72 hours,
1 week, Maximum
(3) Message type :
Enables you to set the default message type - Text,
Voice, E-mail and Fax. The network can convert the
message into the selected format.
(4) Status report :
Enables you to activate or deactivate the report function.
When this function is On, the network will inform you
whether or not your message has been delivered .
(5) Alert period :
Enables you to select the period of alert type when
incoming message
One time, Every 2 min, Off