Quick Start Guide

1.Connect USB cable’s Square Side interface to the bottom

of the scanner;

2.Connect the other side of USB to the computer host.

3.Our barcode scanner features with wireless transmission mode

and USB cable transmission mode. When triggered to wake up,

the scanner will auomatically identify whether the USB cable is

connected. If identify, it will work in USB cable transmission mode,

data transmitted via USB cable; If not, will work in wireless

transmission mode, data transmitted via Bluetooth wireless .

sample graph

Installation of Cable

USB Cable Installation

Each barcode scanner is with one USB cable.，For connection,

please refer to above sample diagram.

Noted: Computer host can charge scanner via USB cable

and USB cable can also be used as a wire to transmit barcodes.

The installation method is as follows:

Ring Barcode Scanner