User's Guide

Enter Setup
** Exit Setup 42
Power Off/Battery Off
Power Off Scanner
Battery Off
(For Long-term Storage/Shipping)
Note: After scanning the Battery Off barcode, you MUST insert the scanner in a powered cradle to exit battery protection
mode before turning it on.
Default Settings
Factory Defaults
Scanning the Reset Scanner/Reset Cradle barcode can restore the scanner/cradle to the factory defaults.
You may need to reset your scanner/cradle when:
1. Scanner/cradle is not properly configured so that the scanner fails to decode barcodes or to communicate with the
cradle.
2. you forget previous configuration and want to avoid its impact.
3. functions that are rarely used have been enabled for the time being.
Reset Scanner
Reset Cradle