Installation Sheet

I. Rough in Valve Installation

Note: Use plumbers tape or equivalent to seal all threaded port joints.

1. Do not remove mud cover from valve before locating mounting surface depth in the wall.

2. Do not turn the cartridge stem - temperature settings are pre-calibrated at the factory.

3. Mount valve to cross support using screws (not included). Valve shall be perpendicular and fixed

firmly to cross support to achieve proper trim attachment.(See Fig 1).

4. Place the cross support with valve between wall studs. The min./max. valve depth template on

the mud cover and vertical height desired within tub/shower enclosure determines the exact

cross support placement. Attach cross support to wall studs.(See Fig 2).

5. Ensure opening in finished wall comes in contact with the mudcover to ensure seal with

Thermo Wall Plate shown in Fig. 4. (See TEMPLATE FOR FINISHED WALL OPENING in Fig 9).

Fig. 1

Cartridge stem

DO NOT TURN

Min depth

Max depth

Finished wall

Mud cover

template

Wall stud

Cross support

Fig. 2

NWP-1-742

Screws

(Not included)