Installation & Assembly

Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty.
We recommend the use of clear silicone sealing materials.
If mounting faucet to stainless steel rim, an under-mount support, (e.g. wood, appropriate size x 1/2”
thick), should be utilized.
1. Drill hole in mounting surface. Recommended deck hole Ø1.350”
not to exceed Ø1.562”.
2. Insert Hoses through base O-RING (1) and hole in mounting surface.
Secure into place with MOUNTING KIT (3). See Figure 1.
3. Attach hot/cold spout supply directly to valves in the wall. See Fig. 2
4. DO NOT
remove the HOSE (6) from SPOUT (4). See Figure 3.
5. Attach WEIGHT (9) to HOSE (6) in the appropriate area shown,
on the upward swing toward the SPRAYHEAD (5), in order to provide
proper pull to hose. See Figure 4.
6. Connect HOSE (6) to valve OUTLET(8). See Figure 4.
Attach CLIP (7) to the connection between HOSE (6) and
OUTLET(8). See Figure 4a.
NWP-1030-5103
REV C
Figure 1
1
3
Mounting
surface
hole
Figure 3
6
4
Figure 4
7
8
See Detail A
Detail A
DO NOT REMOVE
ZIP TIE
9
4
Figure 4a
6
8
6
5
Figure 2
Wall valves
(not included)
9/16-24 UNEF (FOR 3/8”
COMPRESSION OUTLET )
3/8” COMPRESSION
OUTLET )
5