Spec Sheet

t: 949.417.5207 l www.newportbrass.com
©2021 Brasstech, Inc.
106
EAST LINEAR
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAMPO/cUPC
• NSF/ANSI 61, SECTION 9
• NSF/ANSI 372
• IPC
• Energy Policy Act of 1992
• California Energy Commission
• All applicable US Federal and State material regulations
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Page 1 of 2 Spec_106_e_6.21
EN-4300jj
Features
• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridges
• Contemporary lever handle design
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 6.23” (15.8 cm) spout height at outlet
• 4.00” (10.2 cm) spout reach (c-c)
• For single hole configurations
• 1.5 GPM (5.7 LPM) Max
Hot and Cold Water Dispenser Faucet
The Hot and Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall
incorporate a spout assembly with
integral supply hoses and feature quarter-turn washerless ceramic disc valve cartridges. Faucet shall incorporate a contemporary lever
handle design and feature a spring-loaded, normally closed hot lever mechanism. Hot and Cold Water Dispenser Faucet shall have a 1.5
gallon (5.7 liters) per minute maximum flow rate and accommodate single hole configurations. Product shall incorporate a 6.23” (15.8 cm)
spout height at outlet and a 4.00” (10.2 cm) spout reach (c-c). Hot and Cold Water Dispenser Faucet shall be Newport Brass Model 106/
____ . [Point-of-Use Water Heater shall be Newport Brass Model 5-036].
15S
10B 26 Other15
Model Description Colors | Finishes
106 Hot and Cold Water Dispenser Faucet
5-036 Point-of-Use Water Heater (115V, 140°F to 190° range) N/A
Specied Model
Product Specication
Add “Color / Finish” sufx to Model number, below.