Spec Sheet

t: 949.417.5207 l www.newportbrass.com
©2021 Brasstech, Inc.
107
NADYA
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAMPO/cUPC
• NSF/ANSI 61, SECTION 9
• NSF/ANSI 372
• IPC
• Energy Policy Act of 1992
• California Energy Commission
• All applicable US Federal and State material regulations
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Page 1 of 2 Spec_107_e_6.21
EN-4300jj
Features
• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridges
• Traditional lever handle design
• Spout assembly with integral supply hoses
• Spring-loaded, normally closed lever handle
• 6.53” (16.6 cm) spout height at outlet
• 4.82” (12.2 cm) spout reach (c-c)
• For single hole configurations
Hot and Cold Water Dispenser Faucet
The Hot and Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with
integral supply hoses and feature quarter-turn washerless ceramic disc valve cartridges. Faucet shall incorporate a traditional lever handle
design and feature a spring-loaded, normally closed hot lever mechanism. Hot and Cold Water Dispenser Faucet shall have a 1.5 gallon
(5.7 liters) per minute maximum ow rate and accommodate single hole congurations. Product shall incorporate a 6.53” (16.6 cm) spout
height at outlet and a 4.82” (12.2 cm) spout reach (c-c). Hot and Cold Water Dispenser Faucet shall be Newport Brass Model 107/____ .
[Point-of-Use Water Heater shall be Newport Brass Model 5-036].
15S
10B 26 Other15
Model Description Colors | Finishes
107 Hot and Cold Water Dispenser Faucet
5-036 Point-of-Use Water Heater (115V, 140°F to 190° range) N/A
Specied Model
Product Specication
Add “Color / Finish” sufx to Model number, below.