Manualshelf

Spec Sheet

ManualsBrandsNewport Brass ManualsAppliancesNadya Collection 107C/08A 1.5 GPM Deck Mounted Single Hole Cold Water Dispenser with Lever Handle in Antique Copper
12
t: 949.417.5207 l www.newportbrass.com
©2021 Brasstech, Inc.
107C
NADYA
Codes / Standards Compliance
Meets or exceeds the following at date of manufacture:
• ASME A112.18.1/CSA B125.1
• IAMPO/cUPC
• NSF/ANSI 61, SECTION 9
• NSF/ANSI 372
• IPC
• ADA & ICC/ANSI A117.1
• Energy Policy Act of 1992
• California Energy Commission
• All applicable US Federal and State material regulations
Colors / Finishes
• 10B: Oil Rubbed Bronze
• 15: Polished Nickel
• 15S: Satin Nickel - PVD
• 26: Polished Chrome
• Other: Refer to the Newport Brass catalog for additional color/finish options.
Page 1 of 2 Spec_107C_c_6.21
EN-4300jj
Features
• Solid brass construction
• Quarter-turn washerless ceramic disc valve cartridge
• ADA compliant traditional cold lever handle
• Spout assembly with integral supply hoses
• 6.48” (16.5 cm) spout height at outlet
• 4.82” (12.2 cm) spout reach (c-c)
• For single hole configurations
• ADA Compliant
• 1.5 GPM (5.7 LPM) Max
Cold Water Dispenser Faucet
The Cold Water Dispenser Faucet shall be made of solid brass construction. Faucet shall incorporate a spout assembly with integral supply
hoses and feature a quarter-turn washerless ceramic disc valve cartridge. Faucet shall incorporate an ADA compliant traditional cold lever
handle design. Cold Water Dispenser Faucet shall have a 1.5 gallon (5.7 liters) per minute maximum flow rate and accommodate single
hole configurations. Product shall incorporate a 6.48” (16.5 cm) spout height at outlet and a 4.82” (12.2 cm) spout reach (c-c). Cold Water
Dispenser Faucet shall be Newport Brass Model 107C/____ . [Integrated Air Gap Base shall be Newport Brass Model 6-028/____].
15S
10B 26 Other15
Model Description Colors | Finishes
107C Cold Water Dispenser Faucet
6-028 Integrated Air Gap Base N/A
Specied Model
Product Specication
Add “Color / Finish” sufx to Model number, below.
** The use of an air gap is required for dispenser faucets drawing from a reverse osmosis filtration system. The Integrated Air Gap Base
(6-028) affords the functionality of a separate air gap within the design of the product as depicted. Failure to specify the Integrated Air Gap
Base (6-028) will result in a product constructed using the standard base (no internal air gap).

Summary of content (2 pages)