INSTALLATION INSTRUCTIONS HOT / COLD WATER DISPENSER Model No: 106, 107, 107x, 108, 108x 2470-5603 Congratulations on the purchase of this Brasstech product, an excellent choice that will give you
IMPORTANT PRODUCT INFORMATION Brasstech water dispensers are tested and warrantied only when connected to Brasstech water heater 5-036. Under normal operation, Brasstech’s line of ‘Hot’ and ‘Hot/Cold’ water dispensers may drip for a period of up to 15 minutes after each use. This condition originates from the unit’s integral hot water tank. It is caused by the thermal expansion of water occurring naturally when cool water is heated in a confined space (the tank).
ATTACHING WATER CONNECTIONS TO SUPPLY AND TANK (See Fig 2) · Connect blue tube to copper tubing of water supply, utilizing a compression nut or connector coupling (not included). · Connect clear tube to heater tank outlet, utilizing brass coupling & insert. · Connect red tube to heater tank inlet, utilizing connector coupling (not included).