User Manual

1. Disconnect and remove existing flange / strainer assembly from drain
pipe.
2. Apply putty material between contact surface of drain flange and
sink hole. Place the drain flange in sink hole.
3. Tighten flange nut to underside of flange, using o-ring and washer.
4.Attach flange to existing tailpiece drain pipes with slip nut provided.
5. Test seal by engaging strainer into flange and adding water. Make adjustments as required.
Remove strainer from flange and drain water from the sink.
INSTALLATION INSTRUCTIONS
LARGE BASKET STRAINER
MODEL No's: 121
Strainer
Drain Flange
Sink
O-ring
Washer
Flange Nut
Slip Nut
[phone]
BRS-121 Santa Ana, Ca. 92705 6/10/2011
www.brasstech.com
Recommended installation by a Professional Plumbing Contractor