NWP 2040 4261

NW
P-2040-4261
REV - G
SCREW (X3)
BASE ANCHOR HO
LE
(X3)
PLASTIC ANCHOR
(X3)
Figure
7
Securing
the
Tub Filler to the
floor.
STEP 5: Install the Hose to the Hand Shower and
the
Tub Filler: Figure 8 (next page) illustrates
installing one end of the HOSE to the HAND SHOWER OUTLET located under the HAND
SHOWER HOLDER. Attach the other end of the HOSE to the HAND SHOWER until both are
secure.
a. Place the HAND SHOWER into the HAND SHOWER HOLDER.
STEP 6:
Confirm
Tub Filler Spout and Hand Shower Functionality
a.
Turn
Tub Filler Lever Handle to the ON position initiating flow through the Tub Filler Spout.
b. Confirm proper Hot and Cold flow through Spout.
c. Remove the HAND SHOWER from the HOSE and direct towards the bath.
d. Pull out on the DIVERTER KNOB to direct flow from the Spout to the HAND SHOWER.
e. With water now flowing through the HAND SHOWER check all HAND SHOWER HOSE
connections for leaks and confirm proper flow through the HAND SHOWER.
f.
Turn
Tub Filler Lever Handle OFF.
THE INSTALLATION IS NOW COMPLETE.
Contact Newport
Brass
Technical Support as needed at (949)-417-5207.