Installation Guide

WIDESPREAD LAVATORY SET

INSTALLATION INSTRUCTIONS

Model No: 1600, 1620

Congratulations on the purchase

of this Newport Brass product,

an excellent choice that will give you

years of quality service and enhance

the look and style of your home.

PAGE 1
WIDESPREAD LAVATORY SET INSTALLATION INSTRUCTIONS Model No: 1600, 1620 Congratulations on the purchase of this Newport Brass product, an excellent choice that will give you years of quality service and enhance the look and style of your home.
PAGE 2
Recommended Installation by a Professional Plumbing Contractor Note:The use of petroleum base plumbers putty on our products will nullify the warranty.We recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25" 1. Place the spout shank through center hole of mounting surface. Secure spout, (spout base ring, if supplied), into place with spout washer and nut. See Fig. 1 2. Place nut & washer on valve body.
PAGE 3
2-1/4” Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 1/23/2004
PAGE 4
Newport Brass Product Care Newport Brass faucets and bath fittings are made of solid brass and are of the finest quality. To maintain the finish on these items, please: - Do not use any abrasive cleaners, detergents, brass or silver polish which will scratch the surface. - Clean with a soft damp cloth. Applying a coating of a non-abrasive liquid wax to the clean surface of the product will keep it looking beautiful. Brass ProTech, a product of Brasstech, Inc.