Manual

3 Tier Towel Shelf
Installation Instructions
Model No. 10-35, 16-35, 19-35
Recommended Installation by a Professional Contractor
1. Measure the appropriate distance, 24”, between plate centers. ( See Fig. 1)
Note: Hole locations should be level.
2. Hold SHELF (1) unit up to mounting surface, check that the unit is level. Mark the hole pattern location
from the WALL PLATES (2) onto the mounting surface.
3. Drill hole(s) in wall at points marked using the appropriate drill size:
· Wood Screw (#8 x 1-3/4”) - use: 1/8" Drill
· Anchor Screw - use: 3/16" Drill
4. Fasten WALL PLATES (2) to wall using either WOOD/ANCHOR SCREWS (3).
(See Fig. 2)
Distance between posts
Fig. 1
Fig. 2
[phone]
AMS-10-35 Santa Ana CA 92705 1/20/04
www.brasstech.com
1
2
3